Dryers & Infrared Drying Tunnels
Home » Ancillary Products » Dryers & Infrared Drying Tunnels
The right drying system is an integral part of your production line. We offer a range of drying solutions to maintain or expedite your production speed.
- Allows for immediate handling of parts after printing.
- The adjustable temperature of the heating element reaches 700°F, and at belt level the temperature is approximately 300°F.
- The element has a height adjustable feature and can be lowered to increase the surface temperature of the printed part to more than 300°F.
- The unit comes equipped with adjustable heat shield at both ends of the drying chamber.
- The conveyor belt has a speed control dial to control the amount of time the printed item spends in the chamber.
When you need to prepare the printed product for packaging and shipping in a short amount of time you should consider a post treatment solution. The MT3 / MT6 are infrared systems for drying all types of inks on pad and/or silk screen printed surfaces.
- The MT3/MT6 dryers use both infrared rays and ventilated air (both together or separately)
- The oven temperature is controlled by a thermoregulator and variable conveyor belt
- The ovens are mounted on telescoping wheels for convenient positioning in your production area
- The MT Series has three belt options: Steel Mesh, Heat Resistant Teflon or Steel Plates
- Optional cold air tunnel is available on the MT6 unit
[embedyt] https://www.youtube.com/watch?v=Ba9F4nCzjfI[/embedyt]
*see our brochure for detailed specifications for each unit.
When you need to prepare the printed product for packaging and shipping in a short amount of time you should consider a post treatment solution. The MT3 / MT6 are infrared systems for drying all types of inks on pad and/or silk screen printed surfaces.
- The MT3/MT6 dryers use both infrared rays and ventilated air (both together or separately)
- The oven temperature is controlled by a thermoregulator and variable conveyor belt
- The ovens are mounted on telescoping wheels for convenient positioning in your production area
- The MT Series has three belt options: Steel Mesh, Heat Resistant Teflon or Steel Plates
- Optional cold air tunnel is available on the MT6 unit
*see our brochure for detailed specifications for each unit.
[embedyt] https://www.youtube.com/watch?v=W9FhHC0krVU[/embedyt]
For drying solvent or water based UV inks Engineered Printing Solutions offers the UV 300 ULTRAVIOLET oven. This device provides high quality performance, with adjustable speeds up to 18 m per minute, thus allowing the polymerization of inks that require up to 2000Mj / cmq. The tunnel allows the passage of objects up to 15 cm high at standard height, which optionally can vary on request. The 300W mercury lamp is height-adjustable. This device is also supplied with wheels and can be moved easily, and with a suction fan that can be connected to filtering and fume-abatement devices.
The advantages of UV curing are numerous: no solvent fumes, versatility of application, and no influence on the degree of absorbency of the printed supports, but above all, practically instantaneous drying.