Laser Plate Makers

Plate Makers

Categories
Ancillary Products - Plate Makers
Printable Area: Semi-automatic photo-polymer plate making systems.
Printable Area: Accommodates plates up to 350 x 250mm.
Printable Area: Accommodates plates up to 500 x 350mm.
Printable Area: System for pad print or screen print operations.
Printable Area: Digital-to-plate laser cliché with dedicated PC & software. Resolutions up to 1,000 dpi.
Printable Area: Air filtration system with combination filters.

This brief video show operation of the film positive system.

Digital to Plate – A laser powered plate making system produces direct-to-plate digital clarity without chemicals or film. The Rapid Fire uses laser etching, a technique where the laser beam traverses left and right, burning away horizontal lines of material as it moves down the material vertically. This is an ideal solution for shops that need many different plates. We supply three different polymer plates for use with the Rapid Fire with estimated lifespan of 10,000 to 100,000 impressions (depending on usage).
  • Special lens allows for extremely fine lines and details including half tones and 4-color process clichés
  • Extreme precision and repeatability
  • Shortens the pre-press process
  • Easy to add new engravings to existing clichés

This is a general filtration system for the removal of particulate matter and gas vapors from solvents or other gases. This filtration system does not need to be vented outside like other units. The Clean Air 300 filters the exhaust and re-circulates clean air. This system uses a combination HEPA and carbon tray for maximum removal of fumes and gases with high particulate content.

The unit has the following features:

  • Connects to 2.5”, 3” and 4” diameter hoses
  • High airflow at 300 cfm
  • Large filters with a long-term life
  • Dual carbon filters
  • Deep-bed gas filter
  • Filter monitor guage
  • Low noise level
  • Thermal overload protection
  • Small foot print
This brief video show operation of the film positive system.
Digital to Plate – A laser powered plate making system produces direct-to-plate digital clarity without chemicals or film. The Rapid Fire uses laser etching, a technique where the laser beam traverses left and right, burning away horizontal lines of material as it moves down the material vertically. This is an ideal solution for shops that need many different plates. We supply three different polymer plates for use with the Rapid Fire with estimated lifespan of 10,000 to 100,000 impressions (depending on usage).Special lens allows for extremely fine lines and details including half tones and 4-color process clichésExtreme precision and repeatabilityShortens the pre-press processEasy to add new engravings to existing clichés
This is a general filtration system for the removal of particulate matter and gas vapors from solvents or other gases. This filtration system does not need to be vented outside like other units. The Clean Air 300 filters the exhaust and re-circulates clean air. This system uses a combination HEPA and carbon tray for maximum removal of fumes and gases with high particulate content. The unit has the following features:Connects to 2.5”, 3” and 4” diameter hosesHigh airflow at 300 cfmLarge filters with a long-term lifeDual carbon filters Deep-bed gas filterFilter monitor guageLow noise levelThermal overload protectionSmall foot print