About
Contact Us
(800) 272-7764
Perspectives—Our Blog
Pick-and-Place
The Pick and Place is a pneumatic or servo-motorized device is designed as an ancillary unit installed on conveyors for automatic loading and unloading of parts. The Pick and Place can be configured for 2, 3, 4 or more axes.
Hot Wind 200
This is a fixed position device mounted directly to the pad print machine. The adjustable hot air blowers can be oriented directly between the pad and the parts being printed in order to improve the release of the ink on the substrate. The Hot Wind 200 is great for cold work areas or slow drying […]
Hot Wind 300
This compact mobile device helps dry parts quickly and can be adjusted to any printing device or part location. The Hot Wind 300 is great for cold work areas or slow drying inks or when it is necessary to print large format areas wet on wet. This device is equipped with a regulator to adjust […]
Master Flow
This simple-to-use device helps dry parts quickly and prevent image deterioration when bulk unloading. The Master Flow hot-air device is designed to be mounted directly on a linear conveyor, elliptical conveyor or rotating table. It is versatile enough if you have alternative mounting requirements. The Master Flow hot-air device is used as an alternative to […]
Flamer
This flamer is height adjustable and therefore adaptable to all working conditions. Pneumatically operated, it can be connected to any pad printing machine produced by Engineered Printing Solutions. The flame can be operated either by pedal or through a signal from the machine to which it is connected. It is available in either a 1 […]
Corona
Many substrates, especially PP-PE plastics require pre-treatment to prepare or improve the bonding surface for ink adhesion. The corona plasma is generated by the application of high voltage to an electrode that has a sharp point. The plasma charge forms that the tip of this sharp point. The corona plasma treatment changes the surface energy […]
Pre-Treatment Flamer
Many substrates, including plastics, require pre-treatment to prepare or improve the bonding surface for ink adhesion. The pre-treatment conveyor flamer is optional equipment that can be added to a standard single pass inkjet platform or purchased as a standalone pre-treatment system. This unit has the following features: Automatic product detection indexes the product and will […]
Pad Shuttle
The pad shuttle device (RR or RRR) is assembled upon request as the machine is being built. The primary advantage is the improvement to the registration for multi-colored applications because the part remains stationary. This device allows printing of 2 or 3 colors. Allows for easier loading and unloading of parts Simple, less complex fixtures […]
Cupslide
The cupslide unit is built to slide the ink cup over the length of the image on the cliché from left-to-right, inking the etched artwork. The pad then picks up the images and prints onto the part. The cup will continue to cycle left-to-right when on single cycle mode until the operator initiates another cycle. […]
Independent Pads
For pad printing machines that apply two or more colors, an independent pad descent is available. This product allows the pad printer to print on larger surfaces. Each pad is able to move up and down independently for printing on different levels of a surface or where part size or height variations demand it The […]