Perspectives—Our Blog

Perspectives—Our Blog

RapidFire Cliché Maker

Digital to Plate – A laser powered plate making system produces direct-to-plate digital clarity without chemicals or film. The Rapid Fire uses laser etching, a technique where the laser beam traverses left and right, burning away horizontal lines of material as it moves down the material vertically. This is an ideal solution for shops that […]

Clean Air 300

This is a general filtration system for the removal of particulate matter and gas vapors from solvents or other gases. This filtration system does not need to be vented outside like other units. The Clean Air 300 filters the exhaust and re-circulates clean air. This system uses a combination HEPA and carbon tray for maximum […]

Pick-and-Place

The Pick and Place is a pneumatic or servo-motorized device is designed as an ancillary unit installed on conveyors for automatic loading and unloading of parts. The Pick and Place can be configured for 2, 3, 4 or more axes.

Hot Wind 200

This is a fixed position device mounted directly to the pad print machine. The adjustable hot air blowers can be oriented directly between the pad and the parts being printed in order to improve the release of the ink on the substrate. The Hot Wind 200 is great for cold work areas or slow drying […]

Hot Wind 300

This compact mobile device helps dry parts quickly and can be adjusted to any printing device or part location. The Hot Wind 300 is great for cold work areas or slow drying inks or when it is necessary to print large format areas wet on wet. This device is equipped with a regulator to adjust […]

Master Flow

This simple-to-use device helps dry parts quickly and prevent image deterioration when bulk unloading. The Master Flow hot-air device is designed to be mounted directly on a linear conveyor, elliptical conveyor or rotating table. It is versatile enough if you have alternative mounting requirements. The Master Flow hot-air device is used as an alternative to […]

Flamer

This flamer is height adjustable and therefore adaptable to all working conditions. Pneumatically operated, it can be connected to any pad printing machine produced by Engineered Printing Solutions. The flame can be operated either by pedal or through a signal from the machine to which it is connected. It is available in either a 1 […]