Machines › XD-AQ › Die-cut blank printer

XD-AQ · Pre-die-cut packaging

Plain blanks in. Printed packaging out.

The standalone XD-AQ prints the blank you already die-cut and the box you already folded — folding cartons, corrugated mailers, coffee sleeves, cup carriers — in full color at 720 dpi. No plates, no primer, no label. A new design is a file load.

White corrugated mailer printed with full-color logo on the XD-AQ

What is the XD-AQ for pre-die-cut packaging?

The standalone XD-AQ is a single-pass inkjet printer on its own conveyor for pre-die-cut and converted fiber packaging. It prints a 5.4 in (137 mm) band of any length at 164 ft/min (50 m/min), 720 dpi CMYK, in high-viscosity water-based ink that needs no primer on kraft, SBS or corrugated liner.

Load it by hand, by robot or from your own line. Keep plain blanks and boxes in stock and print the version each order needs — seasonal, regional, per-customer or private-label.

Print width
5.4 in (137 mm), any length
Speed
164 ft/min (50 m/min)
Part height
Up to 10 in (254 mm)
Substrates
Kraft, SBS, CCNB, corrugated liner
Loading
Hand, robot or your line
Software
Open RIP — your own workflow
Changeover
Under 1 minute

Applications

What pre-die-cut packaging can the XD-AQ print?

White folding carton printed on the XD-AQ
Folding carton

Blanks & glued cartons

  • Die-cut blank or glued flat carton
  • Kraft, SBS and CCNB, primerless
  • Versioned per order
Corrugated mailer box with printed brand band
Corrugated

Mailers & cases

  • Folded mailers and erected cases up to 10 in tall
  • CMYK brand-and-code band replaces a label
  • Kraft, mottled white, coated liner
Close-up of white and kraft coffee cup sleeves printed in full color on the XD-AQ
Sleeves & wraps

Coffee sleeves & belly bands

  • Printed flat, before forming
  • White or kraft
  • Per-account, per-season artwork
Kraft cup carrier printed with drive-thru coffee branding
Carriers

Cup & beverage carriers

  • Carrier panels on kraft
  • Solid color and fine type
  • Short runs per location or promotion
Full-color pizza logo printed on a white pizza box lid
Pizza boxes

Pizza & bakery boxes

  • Full-color art on the lid of a stock box
  • No plates, no manufacturer minimums
  • Per-restaurant versions
Full-color food artwork printed on a white carryout carton
Paper foodservice

Carryout cartons

  • Photographic food art on white board
  • Decorate stock cartons one case at a time
  • Water-based ink*

Proof

How sharp is it on kraft and corrugated?

Straight crops of the photos — not enhanced or sharpened.

Close-up of small type and icons printed on a white corrugated mailer
Corrugated mailerSmall caps and icons on mottled white liner
Close-up of print on a brown kraft cup carrier
Kraft carrierSolid color and fine type on brown kraft
Standalone XD-AQ printer on its conveyor

Why print after die-cutting

Why print the blank instead of the sheet?

In fiber packaging, decoration is committed before the part exists — on the press sheet, with plates, make-ready and a run-length minimum. Every new version means another plate set and another stack of pre-printed inventory.

The XD-AQ moves decoration to the end. Hold plain blanks, and print the version each order needs: seasonal, regional, per-customer or private-label. That is work converters turn away today, and custom print below a manufacturer's minimum that foodservice buyers can't get.

Is your part an XD-AQ part?

  • The printed face is flat — blank, panel, carrier face, sleeve, box side
  • The graphic fits a 5.4 in band running the length of the part
  • The part is 10 in tall or shorter
  • Porous fiber — kraft, SBS, CCNB, corrugated liner
  • Short, versioned or late-stage work

Standalone XD-AQ specifications

Print width5.4 in (137 mm) per pass, any length along the belt
Speed164 ft/min (50 m/min)
Resolution720 dpi CMYK, eight heads (two per color)
Part heightUp to 10 in (254 mm)
Transport24 in belt, 16 ft conveyor — both customizable
SoftwareOpen RIP architecture — use your own RIP and color workflow
ChangeoverUnder 1 minute — load a new file
Ink complianceNestlé Guidance Note, Swiss Ordinance and German Printing Ink Ordinance compliant; EuPIA GMP; PFAS-free*
OptionsDenesting and automatic loading · robotic load/unload · stacking · 100% vision inspection with reject · inline coder

Die-cut packaging questions

Can you digitally print a carton after it has been die-cut?

Yes. The XD-AQ prints the die-cut blank or the glued flat carton directly, so you keep plain stock and print the artwork each order needs.

Can it print finished corrugated boxes?

Yes. Folded mailers and erected cases up to 10 in tall pass under the heads; a CMYK brand-and-code band prints in one pass and can replace a label.

Does it need a primer on kraft or coated board?

No. High-viscosity water-based ink prints primerless on kraft, SBS, CCNB and corrugated liner — no coating station, nothing to cure.

How are parts loaded?

By hand, by robot or from your own line. Options include denesting and automatic loading, robotic load and unload, stacking, 100% vision inspection with reject and an inline coder.

Can I use my own RIP?

Yes. The XD-AQ has an open RIP architecture, so you keep your own RIP and color workflow.

Next step

Send us your blanks.

Send die-cut blanks, boxes or sleeves with your current artwork. We print them on the XD-AQ and send them back.

*Ink compliance statements are based on intentionally added substances, per the ink manufacturer of record. PFAS-free per the ink manufacturer of record. Suitability for any specific food-packaging application is determined by the end user. Full Statement of Regulatory Compliance available on request.