Machines › XD-AQ › Clamshell printing line

XD-AQ · Molded fiber foodservice

Blank clamshells in. Printed clamshells out.

A complete molded fiber clamshell printing line: denester, XD-AQ printer and stacker. Your operator loads stacks of blank bagasse or pulp clamshells and unloads printed stacks — full-color brand art and fine type on the lid, no labels, nothing to cure.

Natural bagasse clamshell printed on the XD-AQ with full-color burger logo

What is the XD-AQ clamshell line?

The XD-AQ clamshell line prints molded fiber and bagasse clamshells after they are formed. A denester separates clamshells from blank stacks onto the belt, the XD-AQ prints the lid top in one pass at 720 dpi CMYK, and a stacker re-nests the printed clamshells.

Standard lines run 50 or 100 clamshells a minute. The printer has headroom for far more, so faster lines are a handling upgrade, not a second printer.

Parts
Clamshells, bowls, lids, trays
Materials
Natural and white bagasse, molded pulp
Print area
5.4 in (137 mm) wide on the lid
Line rate
50 or 100/min standard; built to your rate
Print
720 dpi CMYK, one pass
Ink
High-viscosity water-based*
Changeover
Under 1 minute
Face printed
Outside of the lid
XD-AQ clamshell printing line: denester at left, printer in the center, stacker at right

How it works

How does the clamshell line work?

Three machines, engineered and built as one line in Vermont.

1 · Denest

Separates clamshells from blank stacks and places them on the belt.

2 · Print

The XD-AQ prints the lid top in one pass at 720 dpi.

3 · Stack

Printed clamshells are re-nested into stacks for packing.

Line rate

At 50 a minute, the printer is mostly waiting.

Every configuration uses the same printer at 164 ft/min (50 m/min). With 6 in clamshells and a 1 in gap — a 7 in pitch — that is about 280 clamshells a minute. Denesting and stacking decide how full the belt is.

50 / minOne denester and stacker
100 / minAdded denesting and stacking
~280 / minPrinter capacity at a 7 in pitch — built to your rate

Going from 50 to 100 a minute is a handling upgrade, not a second printer.

Proof

Printed on the XD-AQ: molded fiber.

Real clamshells and lids, printed direct on bagasse and molded pulp — no label, nothing to cure.

Close-up of 3 point type and icons printed on a molded fiber clamshell
Zoom on Peak Burger3 pt type on molded fiber — a straight crop of the photo, not enhanced or sharpened

Why print the clamshell

Why put a brand on a takeout clamshell?

Foam bans in twelve US states and DC, and chain-wide moves to fiber, have put billions of molded fiber clamshells into foodservice — and almost every one leaves the plant blank. Branding it today means a label, a sticker or nothing.

Printing the clamshell itself turns the most-seen package in takeout into brand space, with no second material on the pack. Private-label, seasonal and per-restaurant versions cost nothing extra to set up: a new design is a file load.

Is your clamshell an XD-AQ part?

  • Molded fiber, bagasse or pulp — natural or white
  • The graphic fits a 5.4 in band across the lid (most logos and panels do)
  • Printing the outside, non-food-contact face
  • Many designs, versions or customers on the same part
  • Parts up to 10 in tall stacked in nests

Specifications

Clamshell line specifications

50 / min line100 / min lineBuilt to your rate
ConfigurationDenester, XD-AQ, stackerAdded denesting and stackingCustom high-speed denesting and stacking
Line rate50 clamshells/min100 clamshells/minSized to target — printer capacity ~280/min at 7 in pitch
Print area5.4 in (137 mm) wide across the lid
PrinterXD-AQ, 164 ft/min (50 m/min), 720 dpi CMYK, eight Xaar Aquinox heads
InkHigh-viscosity water-based pigment — Nestlé Guidance, Swiss and German ink ordinances compliant; EuPIA GMP; PFAS-free*
Loading / outputBlank stacks in · printed, re-nested stacks out
ChangeoverUnder 1 minute — load a new file
Options100% vision inspection with reject · inline coder

Clamshell printing questions

Can you print on molded fiber clamshells after they are formed?

Yes. The XD-AQ is non-contact and prints the formed clamshell lid directly, with up to 10 in of clearance under the heads. Nothing touches the abrasive fiber surface but ink.

How many clamshells per minute can the line print?

Standard lines run 50 or 100 clamshells a minute. The printer runs at 164 ft/min in every configuration — about 280 six-inch clamshells a minute at a 7 in pitch — so line rate is set by denesting and stacking, and EPS builds lines to higher target rates.

Does printing bagasse need a primer or coating?

No. High-viscosity water-based ink holds at the surface of bagasse and molded pulp without a primer, coating station or cure lamp.

Which face of the clamshell is printed?

The outside of the lid — the non-food-contact face.

Can I print bowls, lids and trays on the same line?

Bowls, lids and trays print on the XD-AQ the same way. Whether one line handles several shapes depends on the denesting and stacking — send your parts and we will tell you what it takes.

Next step

Send us your clamshells.

Send blank clamshells with your current artwork. We print them on the XD-AQ in East Dorset, Vermont and send them back, so you can judge density, fine type and finish on your own fiber.

*Ink compliance statements are based on intentionally added substances, per the ink manufacturer of record. PFAS-free per the ink manufacturer of record. Suitability for any specific food-packaging application is determined by the end user. Full Statement of Regulatory Compliance available on request.